7 Sealcoating Tips You Can’t Neglect

7 Sealcoating Tips You Can’t Neglect

Seal coat is a sealant that is applied to protect the asphalt on your driveway, walkway, or parking lot. Sealcoating prevents water, oil, UV rays and other elements from penetrating into and destroying the pavement. It also provides a nice resistant surface for cars to drive on and makes it easier to clean up leaves during the autumn months.

If you are considering sealcoating your property, there are several things you need to know before starting the process. These tips will help ensure that the sealcoat goes on smoothly and doesn’t cause problems down the line.

Wait for the Right Temperature

Ensure that sealer is applied at the right temperature, typically from 50 to 90 degrees Fahrenheit. If it is too cold, then sealcoating won’t bond well with your pavement surface, and if it is too hot, the sealcoat will dry before you have even had a chance to apply an adequate coat.

When in doubt, err on the side of caution and sealcoat during a warmer time of year, which should be sometime in summer. If a sealcoat isn’t applied when these conditions are met, it can result in a bumpy or uneven finish that doesn’t last long at all.

Clean Your Pavement

When sealcoating for the first time, you will need to clean your pavement well before applying sealer. This is important because any dirt or debris can prevent sealant from properly adhering and bonding with your asphalt. Once your pavement is clean, allow it to completely dry.

Fill the Cracks

Identify any cracks on the pavement and make sure they are all filled in first. It is essential to seal cracks to prevent water from seeping into the pavement, which could cause damage over time.

Apply the Sealcoat Evenly

Ensure you sealcoat your entire driveway or parking lot area evenly to avoid any missed spots on the pavement surface. If it isn’t applied evenly, it can result in uneven-looking asphalt.

Apply 2 Coats

Ensure that two coats are applied at least, instead of one thick layer. This will ensure the sealant goes on evenly and doesn’t wear away quickly or easily.

Don’t Apply if it’s Raining

Make sure you don’t sealcoat if it’s raining or if rain is expected within 24 hours. A wet surface will prevent the sealcoat from adhering to the surface and drying properly.

Sealcoat Every 2 – 3 Years

You should wait at least 6 months before sealcoating newly installed asphalt. Subsequent seal coats should take place every two to three years. Over time sealant will wear away and it is important to reapply it. This will protect your asphalt from natural elements such as rain and maintain a beautiful look for your driveway or parking lot area.

When it comes to sealcoating, the experts at DG Pavement Solutions in Cape Coral, FL have seen it all. From a cracked driveway or walkway that needs a quick fix before winter hits to an entire parking lot that is marred with potholes and cracks after years of wear and tear, our team has been there. We can help ensure your property looks its best all-year-round by providing regular asphalt maintenance services, from sealing concrete surfaces to resurfacing asphalt driveways.

Get a free quote here!